Revive - Luxury Plunge

• Fully integrated 1 HP chiller system (no external unit required)
• All-in-one design with plug-and-plunge operation
• Cooling capability down to approximately 23°F with ice mode
• Continuous water circulation with dual filtration system
• Built-in ozone sanitation (with optional UV in some configs)
• WiFi-enabled app control and touchscreen interface
• Color-changing LED lighting for ambient experience
• Insulated cover included for temperature retention
• Suitable for indoor and outdoor use

• Tub Material: Stainless steel interior with reinforced aluminum exterior
• Chiller: Integrated 1 HP cooling system
• Temperature Range: ~23°F to 107°F
• Water Capacity: ~90–140 gallons (varies slightly by config)
• Filtration: Dual-stage (1-micron filter + mesh pre-filter)
• Sanitation: Ozone system (with optional UV support)
• Power Requirement: 120V / 15A dedicated circuit
• Dimensions: ~72" L x 30.8" W x 37.8" H
• Weight (Empty): ~220–360 lbs

• Free shipping within the contiguous United States
• Standard delivery is curbside
• Customer is responsible for moving the unit to its final location

• 1-year limited manufacturer warranty on cold plunges, chillers, and systems
• Covers defects in materials and workmanship under normal use
• May include repair, replacement parts, or troubleshooting support
• Does not cover misuse, improper installation, environmental damage, or lack of maintenance
• Warranty applies only to the original purchaser and is non-transferable

Revive Plunge products may be returned within 30 days of delivery. To start a return, contact us at hello@chillworthy.com for return authorization before shipping anything back. Unauthorized returns cannot be accepted.

Returned items must be in original packaging. A restocking fee of 15-25% applies to all non-defective returns, and the customer is responsible for return freight. Items that have been used, filled with water, or installed are non-returnable.

Order Cancellations. Orders cancelled before shipping may be subject to a processing fee.

Items that arrive damaged or defective are covered when reported per the inspection requirements below. No restocking fee, no return costs.

Required Inspection at Delivery. You must inspect your shipment while the delivery driver is present:

• Minor visible damage (dents, punctures, crushed corners on packaging): note it specifically on the delivery receipt (BOL) before signing and photograph it. Then inspect the contents.
• Severe damage: refuse the shipment, write "Refused due to damage" on the delivery receipt, and photograph everything immediately.
• Why this matters: signing a clean delivery receipt without noting damage is legal confirmation the shipment arrived in good condition, and significantly limits any freight claim afterward.

Concealed Damage

• Damage discovered after unpacking must be reported within 24 hours of delivery with clear photos of the product and original packaging.
• Do not discard any packaging until your claim is resolved.